| Product Image |
Item Name- |
Price |
 |
This product replaces the plastic cap on the back of a 2-Wire Motor 269 with a quadrature encoder. Install this product and connect it to a Cortex Microcontroller via I2C to receive direct feedback from the motor. This encoder provides information on how fast the motor is going, how far it has... |
$29.99
Add:
|
 |
This product replaces the plastic cap on the back of a VEX 2-Wire Motor 393 with a quadrature encoder. Install this product and connect it to your Cortex Microcontroller via I2C to receive direct feedback from the motor. This encoder provides information on how fast the motor is going, how far it... |
$29.99
Add:
|
 |
Push & Pull The Linear Motion Kit provides a method for VEX builders to create linear mechanisms. Utilize the low friction slide rails for your own mechanisms or combine them with included Rack Brackets and VEX Rack Gears (not included) to build direct driven linear actuators. Each of the... |
$24.99
Add:
|
 |
Mecanum wheels allow savvy robot designers to create drivetrains capable of moving in any direction using a standard chassis shape. Simply power each wheel with a different motor and by changing the directions the wheels spin get your robot to move in different directions! Allows robots to move in... |
$59.99
Add:
|
 |
The Nut Bar consists of a plastic piece with 20-holes sized such that VEX 8-32 screws will self-tap into them. By mounting these bars onto VEX structural metal, you create a series of holes which can be used as nuts. This allows a set of holes that can be mounted to without having access to the... |
$4.99
Add:
|
 |
Try a Strong Foundation. VEX Base Plates are designed to serve as a foundation for a variety of robotics applications. Use them to create a large stationary robotic arm, or interlock them to build larger manufacturing type systems. These pieces can also be used as large structural pieces in other... |
$29.99
Add:
|
 |
These 8-32 x 0.125" setscrews fit in VEX Shaft Collars. Use them as replacements or spare parts. 8-32 thread. Use 5/64 Allen to tighten. Technical Specifications Kit Contents (32) 8-32 x 0.125" Setscrews Compatibility VEX Shaft Collars Thread Type 8-32 Size 0.125" long |
$4.99
Add:
|
 |
Pull it up. This kit provides the ability to implement a winch and pulley system and create block and tackle mechanisms to utilize mechanical advantage. Lift, lower, hang, drag and more. Configurable for many applications. Ratchet and Pawl can be engaged to prevent back driving. Ratchet... |
$14.99
Add:
|
 |
These wire retaining clips are upgrades for the standard Cortex Microcontroller clips and are designed to secure wires in a competitive robotics environment. (3) clips included. Upgrades, not replacements, for standard Cortex clips. Zip-tie wires into place to ensure secure connections. Zip-ties... |
$3.99
Add:
|
 |
The VEX Turntable Bearing Kit provides two options for low friction, high load rotational joints. These are especially well suited for rotational joints with lots of side load - this kit makes it easy to build a turret on your robot! Integrated gearing makes each turntable simple to actuate while... |
$19.99
Add:
|
 |
Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain. 2.75" diameter 7 rollers per wheel Technical Specifications Kit Contents (2)... |
$19.99
Add:
|
 |
The VEX Protobot Robot Kit serves as the core around which you can design and assemble amazing robots. When combined with control system options you can create a radio control, programmable autonomous or dual control robot. This kit contains over 300 parts, pieces and detailed assembly instructions... |
$199.99
Add:
|
 |
If you are a hardcore VEX builder, this is the kit you're going to want. The VEX Booster Kit contains over 600 pieces of VEX Structual and Motion Components. Use the parts in the Booster Kit with the Protobot Robot Kit to build bigger and better robots. This kit includes pieces specifically... |
$179.99
Add:
|
 |
Shaft couplers are the same length as old VEX clutches, allowing 2-Wire Motors to be used in places that previously had a clutch without changing shaft length. Makes replacing 3-Wire Motors quick and simple. Placement between motor and drive shaft makes changing shafts easier. Technical... |
$4.99
Add:
|
 |
Make your robot lighter! The kit consist of the following parts: (1) Aluminum Chassis 25x25x2 (4) Aluminum C-Channel 1x2x1x25 (1) Aluminum C-Channel 1x5x1x25 (2) Aluminum Plate 5x25 (4) Aluminum Bar 1x25 Note: VEX Aluminum components are only sold as part of larger bundle kits. These components are... |
$99.99
Add:
|
 |
The square shaft has rounded corners which allow it to spin easily in a round hole, while locking to a square hole. Three length: 2", 3", and 12". Use the 12" to make your own custom length shafts. Works with motors, wheels, gears, and bearings. Technical Specifications Kit Contents Drive... |
$5.49
... more info
|
 |
Use this cable to connect the VEX LCD Display to the VEX Cortex Microcontroller. 4-pin end connects to UART port on Cortex Microcontroller. 3-pin ends connect to VEX LCD Display. Technical Specifications Kit Contents (1) Serial Y-Cable Compatibility... |
$7.99
Add:
|
 |
This kit contains four sizes of VEX Spur Gears (12-, 36-, 60-, and 84-tooth gears). The 60- and 84-tooth gears have extra mounting holes for attaching metal bars or parts to these gears when using them as part of a turntable system or similar design. Create robot transmissions, gearboxes, and gear... |
$12.99
Add:
|
 |
Toughen Up! Build mechanisms capable of withstanding higher stresses than ever before. Lift heavier loads, and survive bigger impacts with the High Strength Gear Kit. High strength gears mate with all VEX spur gears. Double-thick face width provides added tooth strength. Metal Square Hole Inserts... |
$29.99
Add:
|
 |
Rack gears can be used to turn rotary motion into linear motion. Use any VEX spur gear as a pinion to drive these rack gears. Stack multiple rack gears back to back for longer motions. Combine these with a VEX linear slide and Rack Gear Bracket (sold separately) to create a simple linear actuator.... |
$19.99
Add:
|
